Wacker Neuson GPi 3200 Operator's Manual page 65

Emission Control Systems Information and Warranty
MAINTENANCE
MAINTENANCE, REPLACEMENT OR REPAIR OF THE EMISSION CONTROL DEVICES
AND SYSTEMS MAY BE PERFORMED BY ANY NONROAD ENGINE REPAIR
ESTABLISHMENT OR INDIVIDUAL.
DAILY INSPECTION
Before running the generator, check the following service items:
PERIODIC MAINTENANCE
C
Safe surroundings )
'--·
___
.:::,__
__ __
( Leakage of gasoline and engine oil )
( Enough clean engine oil )
( AC and DC terminals for damage )
Periodic maintenance is vital to safe and efficient operation of your generator.
Check the table below for periodic maintenance intervals.
IT IS
ALSO NECESSARY FOR THE USER OF THIS GENERATOR TO
CONDUCT THE MAINTENANCE AND ADJUSTMENTS ON THE EMISSION·
RELATED PARTS LISTED BELOW TO KEEP THE EMISSION CONTROL
SYSTEM EFFECTIVE.
The emission control system consists of the following parts :
(1) Carburetor and internal parts (5) Spark plug
(8) Exhaust manifold, if
applicable
(2) Cold start enrichment system,
if applicable
(3) Intake manifold, if applicable
(4) Air cleaner elements
(6) Magneto or electronic ignition
system
(7) Spark advance/retard
system, if applicable
(9) Hoses, belts, connectors, and
assemblies
The maintenance schedule indicated in the table is based on the normal generator operation. Should the
generator be operated in extremely dusty condition or in heavier loading condition, the maintenance intervals
must be shortened depending on the contamination of oil, clogging of filter elements, wear of parts, and so on.
wc_tx001789gb.fm
65
W-'CKEit
NEUSON