Wacker Neuson GPi 3200 Operator's Manual page 4

Foreword
GPi 3200 I 4300
r~~;~~=;-1
I!
~ _ljf~ABCPDP/1
:.cc·.cc~.,
..•
_._._._._._._._._._._-::.-.::.c·c~.,,._._,
...... .
wc_gr011162
Machine
A nameplate listing the model number, item number, revision number, and serial
identification
number is attached to this machine. The location of the nameplate is shown above.
Serial number
For future reference, record the serial number in the space provided below. You will
(S/N)
need the serial number when requesting parts or service for this machine.
I
Serial Number:
Machine • From this point forward in this documentation, Wacker Neuson Production
documentation
Americas LLC will be referred to as Wacker Neuson.
• Keep a copy of the Operator's Manual with the machine at all times.
• Use the separate Parts Book supplied with the machine to order replacement
parts.
• If you are missing either of these documents, please contact Wacker Neuson to
order a replacement or visit www.wackerneuson.com.
• When ordering parts or requesting service information, be prepared to provide
the machine model number, item number, revision number, and serial number.
Expectations •
This manual provides information and procedures to safely operate and main-
tain the above Wacker Neuson model(s). For your own safety and to reduce the
risk of injury, carefully read, understand, and observe all instructions described
in this manual.
for
information in
this manual
• Wacker Neuson expressly reserves the right to make technical modifications,
even without notice, which improve the performance or safety standards of its
machines.
• The information contained in this manual is based on machines manufactured
up until the time of publication. Wacker Neuson reserves the right to change
any portion of this information without notice.
• The illustrations, parts, and procedures in this manual refer to Wacker Neuson
factory-installed components. Your machine may vary depending on the
requirements of your specific region.
W~CKER
NEUSON
4
wc_tx001874gb.fm