Changing The Engine Oil - Wacker Neuson GPi 3200 Operator's Manual

Inverter generator
Hide thumbs Also See for GPi 3200:
Table of Contents

Advertisement

Maintenance
GPi 3200 /4300
5.6
Changing the Engine Oil
When
Change the engine oil after the first 20 hours of operation, and every 50 hours
thereafter.
Prerequisites
• Engine is stopped, but still warm
Changing the
engine oil
• Machine is on a level surface
• Fresh engine oil (see engine operator's manual)
• Plastic cloth and a container of sufficient volume to collect drained oil
Note: Collect, store and dispose of drained oil in accordance with current environ-
mental protection regulations.
WARNING
Burn hazard. Engine and exhaust pipe become extremely hot during operation .
..,. Stop the engine and allow the machine to cool before changing the engine oil.
Follow the procedure below to change the engine oil
1. Place a plastic cloth and a collection container beneath the machine.
2. Unscrew and remove the oil filler cap (0) from the oil fill port.
wc_gr006669
3. The oil drain plug (E) is located at the base of the engine. Unscrew and remove
the oil drain plug. Drain the oil into a suitable container.
4. Re-install the oil drain plug.
5. Add new engine oil to the upper line of the level gauge on the oil filler cap. When
the proper oil level is reached, re-install the oil filler cap. See Checking the
Engine Oil.
WARNING
Most used oil contains small amounts of materials that can cause cancer and other
health problems if inhaled, ingested, or left in contact with skin for prolonged
periods of time .
..,. Take steps to avoid inhaling or ingesting used engine oil.
..,. Wash skin thoroughly after exposure to used engine oil.
W-'CKEil
NEUSON
52
wc_tx001240gb.fm

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GPi 3200 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents