Maintenance
GPi 3200/4300
5.8
Cleaning the Fuel Strainer
When
Clean the fuel strainer monthly, or after every 200 hours of operation.
Prerequisite
Description
Procedure
Engine is stopped and cool to the touch.
The fuel strainer (M) removes dirt and water from the fuel before it enters the
carburetor. Water and sediment collect in the fuel strainer cup (M1).
WARNING
Fire/burn hazards. Gasoline is flammable and can ignite or explode.
lftl>
Keep all open flames, sparks, and cigarettes away from the machine while
cleaning the fuel strainer.
lftl>
Do not clean the fuel strainer while the engine is running or hot.
Follow the procedure below to clean the fuel strainer.
wc_gr006673
1. Using a wrench, remove the fuel strainer cup, gasket (M2), and screen (M3)
from the generator.
2. Empty collected water and sediment from the fuel strainer cup.
3. Using a clean dry cloth, wipe any remaining water and sediment from the
screen, the gasket, and the inside of the fuel strainer cup.
4. Re-assemble and re-install the fuel strainer. Tighten securely to prevent fuel
leaks.
W4CKEa
NEUSON
54
wc_tx001240gb.fm
Need help?
Do you have a question about the GPi 3200 and is the answer not in the manual?