Danfoss VLT AutomationDrive FC 302 Instruction Manual page 39

Commissioning
5.3.3 LCP Layout
The LCP is divided into four functional groups (see
Figure 5.1).
A. Display area
B. Display menu keys
C. Navigation keys and LEDs
D. Operation keys and reset
1
Status
7.83 A
799 RPM
2 0.000
A
53.2 %
4
Auto Remote Ramping
6
Quick
Status
B
Menu
7
10 C
On
OK
15
Warn.
16
Alarm
17
Hand
D
Off
on
18 19
Figure 5.1 Local Control Panel (LCP)
A. Display area
The display area is activated when the adjustable
frequency drive receives power from the AC line voltage, a
DC bus terminal, or an external 24 V DC supply.
The information displayed on the LCP can be customized
for user application. Select options in the Quick Menu
Q3-13 Display Settings.
MG34U422
Instruction Manual
3
1(1)
36.4 kW
5
9
Main Alarm
Menu Log
8
11
12
13
Auto
Reset
on
14
20 21
Danfoss A/S © 06/2015 All rights reserved.
Display Parameter number
1 0-20
2 0-21
3 0-22
4 0-23
5 0-24
Table 5.1 Legend to Figure 5.1, Display Area
B. Display menu keys
Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
Key Function
6 Status Shows operational information.
7 Quick Menu Allows access to programming parameters
for initial set-up instructions and many
detailed application instructions.
8 Main Menu Allows access to all programming
parameters.
9 Alarm Log Displays a list of current warnings, the last
ten alarms, and the maintenance log.
Table 5.2 Legend to Figure 5.1, Display Menu Keys
C. Navigation keys and LEDs
Navigation keys are used for programming functions and
moving the display cursor. The navigation keys also
provide speed control in local operation. There are also
three adjustable frequency drive status indicator lights in
this area.
Key Function
10 Back Reverts to the previous step or list in the
menu structure.
11 Cancel Cancels the last change or command as long
as the display mode has not changed.
12 Info Press for a definition of the function being
displayed.
13 Navigation Use the four navigation keys to move
keys between items in the menu.
14 OK Use to access parameter groups or to enable
a selection.
Table 5.3 Legend to Figure 5.1, Navigation Keys
Default setting
Speed [RPM]
Motor Current
Power [kW]
Frequency
Reference [%]
5
37
5