1. Specifying the Settings for Originals
This chapter describes how to specify the sizes and orientations of originals and how to handle originals
that are large or of different sizes.
Specifying Original Sizes
You do not need to specify the size of originals if they are regular sizes because they are detected
automatically. For information about sizes that are detected automatically, see "Sizes Detectable with
Auto Paper Select", Paper Specifications and Adding Paper.
You do need to specify the size of an original that is not detected automatically.
Selecting a Regular Size for the Original
Select the size of the originals from the regular sizes.
1.
Press [Special Original].
2.
Press [Original Size].
3.
Select the size of original.
4.
Press [OK] twice.
7