Copying Onto Tab Stock - Ricoh Pro C7100s Operating Instructions Manual

2. Basic Copying
Paper you are using
Envelopes
• The Duplex function cannot be used with translucent paper. If the Duplex function is specified,
cancel the setting.
You need to specify the type of paper you are using in [Tray Paper Settings] to make copies using paper
from Tray 1, Tray 2, or the wide LCT. For details, see "Tray Paper Settings", Paper Settings. For details
about how to load and copy paper from the bypass tray, see page 29 "Copying from the Multi Bypass
Tray (Tray A)".

Copying onto Tab Stock

For details about the optional units required for this function, see "Functions Requiring Optional
Configurations", Getting Started.
• The Duplex function cannot be used with tab stock. If the Duplex function is specified, cancel the
setting.
Loading tab stock into Tray 2
Load the tab stock with the side to be copied facing down. For details about how to load tab stock
on paper trays, see "Loading tab stock into Tray 2", Paper Specifications and Adding Paper. Tab
stock is fed starting from the top tab.
34
Paper type
Envelope
CNP002
Paper trays
• Multi bypass tray (Tray A)
• Wide LCT