Batch Mode - Ricoh Pro C7100s Operating Instructions Manual

Batch Mode

Using Batch mode, you can copy an original that is too large to place in the ADF by placing it in the
ADF in sections (batches). The original will be scanned and stored as a single document.
• Place special originals, such as translucent paper, one by one.
The maximum number of sheets you can load in the ADF is 220.
1. Press [Special Original].
2. Press [Batch], and then press [OK].
3. Place the first part of the original, and then press the [Start] key.
4. After the first part of the original has been fed, place the next part, then press the [Start]
key.
To copy subsequent originals in this mode, repeat Step 4.
• When the Sort, Combine, or 1 Sided
after all originals have been scanned.
• You cannot switch between one-sided and two-sided originals during copying.
2 Sided function has been selected, press the [ ] key
Batch Mode
15