Page Numbering - Ricoh Pro C7100s Operating Instructions Manual

Default: [0 mm]
•
Left-Right: Left 17.0 inches–Right 17.0 inches
Top-Bottom: Top 17.0 inches–Bottom 17.0 inches
Default: [0.0 inch]
• For details about how to change the Copier / Document Server Features, see "Accessing User
Tools", Connecting the Machine/ System Settings.

Page Numbering

This section describes the user tools in the Page Numbering menu under [Stamp].
Stamp Format
You can select the page number format given priority when [Page Numbering] is pressed.
Default: [P1,P2...]
Font
You can select the font in Page Numbering mode.
Default: [Font 1]
Size
You can select the size of the stamp printed in Page Numbering mode.
Default: [Auto]
Duplex Back Page Stamping Position
You can select the position of the duplex back page number printed in Duplex mode.
Default: [Opposite Position]
Page Numbering in Combine
You can select page numbering when using the Combine function and the Page Numbering
function together.
Default: [Per Original]
Stamp on Designating Slip Sheet
You can select whether or not to print the page number onto slip sheets when using the Designate
function set to "Copy" and the Page Numbering function together.
Default: [Off]
Stamp Position
Specify how each of stamps is printed.
(mainly North America)
Stamp
239