Ricoh Pro C7100s Operating Instructions Manual page 89

Specify Finishing Size
Specify the size of the finished bound booklets to determine the position where you want to cut the
fore edge.
• When specifying the fore edge cut, be sure that the cut is at least 6 mm (0.24 inches) from the fore
edge.
Specifying the distance of the cut from the fore edge
Specify the distance of the cut from the fore edge.
1. Press [Cut Fore Edge].
2. Make sure that [Specify Cut Size] is selected.
3. Enter the cut length using the number keys, and then press [ ].
• You can adjust the position of the fore edge cut from 6.0 to 50.0 mm (0.24 to 1.96 inches) in 0.1
mm (0.01 inches) increments.
• For details about how to perfect bind, see page 83 "Perfect Binding".
Finishing
87