Input / Output - Ricoh Pro C7100s Operating Instructions Manual

6. Copier / Document Server Features

Input / Output

This section describes the user tools in the Input / Output menu under [Copier / Document Server
Features].
SADF Auto Reset
In SADF mode, an original must be placed within a specified time after the previous original has
been fed.
Default: [5 second(s)]
You can adjust this time from 3 to 99 seconds in increments of 1 second.
Copy Eject Face Method in Glass Mode
You can select the way in which copies are delivered when copying an original placed on the
exposure glass.
Default: [Face Up]
Memory Full Auto Scan Restart
When memory becomes full while scanning originals, the machine can make copies of scanned
originals first, and then automatically proceed scanning remaining originals.
Default: [Off]
• On
You can leave the machine unattended to make copies, but sorted pages will not be
sequential.
• Off
When memory becomes full, the machine stops operation allowing you to remove the copy
pages delivered on the output tray.
Sort / Stack Shift Tray Setting
You can specify whether to shift the shift tray in Sort mode or Stack mode.
Default: [On]
Insert Separation Sheet
You can specify the number of copy pages for inserting the separation sheet from 1 to 999 pages
in increments of 1 page.
Default: [1 set(s)]
Letterhead Setting
If you select [Yes] in this function, the machine rotates the image correctly.
Default: [No]
246