Reducing or Enlarging Originals
This section describes methods of reducing or enlarging images by specifying a reproduction ratio, or a
paper size.
Base Point
The base point of reduce/enlarge differs depending on how the original is scanned. When the
original is placed on the exposure glass, the upper left corner will be the base point. When it is
placed in the ADF, the bottom left corner will be the base point.
• Placing the original on the exposure glass
• Placing the original in the ADF
In addition to the functions described in this section, advanced reduce/enlarge copy functions are also
available. For details about these functions, see page 120 "Advanced Reduce/Enlarge Copying".
• The reproduction ratio is between 25 and 400%.
Preset Reduce / Enlarge
This function allows you to reduce or enlarge images by selecting a preset ratio.
You can register up to two frequently used reproduction ratios other than the preset reduce/enlarge
ratios.
Reducing or Enlarging Originals
CKN005
CKN006
41