Connection With 1:1 Communication (General-Purpose Serial Communication) - Panasonic FP E Series User Manual

7.5.3 Connection with 1:1 Communication (General-purpose serial
communication)
System register settings
Settings for COM1 port (AFPG801, AFPG802)
No.
No. 412 COM1 port selection of communication
mode
No. 413 Communication format for COM1 port
No. 415 Baud rate setting for COM1 port
No. 416 Starting address for receive buffer for
COM1 port
No. 417 Receive buffer capacity for COM1 port
Settings for COM2 port (AFPG802, AFPG806)
No.
No. 412 COM2 port selection of communication
mode
No. 414 Communication format for COM2 port
No. 415 Baud rate setting for COM2 port
No. 418 Starting address for receive buffer for
COM2 port
No. 419 Receive buffer capacity for COM2 port
Settings for TOOL port (FPΣ 32k type only)
No.
No. 412 TOOL port selection of communication
mode
No. 413 Communication format for TOOL port
No. 415 Baud rate setting for TOOL port
No. 420 Starting address for receive buffer for
TOOL port
No. 421 Receive buffer capacity for TOOL port
Note:
The TOOL port becomes the computer link automatically in the PROG. mode even if the general-
purpose serial communication has been set. (It is always possible to communicate with the tool software
such as FPWIN GR in the PROG. mode)
Name
Name
Name
Set Value
General-purpose serial communication
Data length: ...... 7 bits/8 bits
Parity check: ..... None/Odd/Even
Stop bit: ............ 1 bit/2 bits
Terminator: ........ CR/CR+LF/None/ETX
Header: ............ No STX/STX
2400 to 115200 bps
DT0 to DT32764 (Initial value: DT0)
0 to 2048 words (Initial value: 2048 words)
Set Value
General-purpose serial communication
Data length: ...... 7 bits/8 bits
Parity check: ..... None/Odd/Even
Stop bit: ............ 1 bit/2 bits
Terminator: ........ CR/CR+LF/None/ETX
Header: ............ No STX/STX
2400 to 115200 bps
DT0 to DT32764 (Initial value: DT2048)
0 to 2048 words (Initial value: 2048 words)
Set Value
General-purpose serial communication
Data length: ...... 7 bits/8 bits
Parity check: ..... None/Odd/Even
Stop bit: ............ 1 bit/2 bits
Terminator: ........ CR/CR+LF/None/ETX
Header: ............ No STX/STX
2400 to 115200 bps
DT0 to DT32764 (Initial value: DT0)
0 to 2048 words (Initial value: 0 words)
7-49