Panasonic FP E Series User Manual page 303

No.
411 Unit No. setting
Communication
mode setting
412
Selection of modem
connection
Communication
414
format setting
COM
2
port
set-
ting
Communication
415 speed (Baud rate)
setting
Starting address for
received buffer of
416
general (serial data)
communication mode
Buffer capacity
setting for data
417 received of general
(serial data)
communication mode
Note) The communication format in a PLC link is fixed at the following settings:
the data length is 8 bits, odd parity, stop bit is 1.
The communication speed (baud rate) is fixed at 115200 bps.
The transmission speed of the RS485 port (COM1) of AFPG806 must be identically set by the
system register and the dip switch in the communication cassette.
Default
Name
1
Computer link
Disabled
Data lenght
bit: 8 bits
Parity check:
"with odd"
Stop bit: 1 bit
9600 bps
2048
2048
value
1 to 99
Computer link
General-purpose serial communication
MODBUS RTU
Enabled/Disabled
Enter the settings for the various items.
Data lenght bit: 7 bits/8 bits
-
Parity check: none/odd/even
-
Stop bit: 1 bit/2 bits
-
The following setting is valid only when
-
the communication mode specified by
system register 412 has been set to
"General-purpose serial communication".
Terminator: CR/CR+LF/None
-
Header: STX not exist/STX exist
-
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
0 to 32764
0 to 2048
Descriptions
12-11