Panasonic FP E Series User Manual page 363

Num-
Name
ber
F11 Block copy
P11
F12 Data read
P12 from IC
card/ROM
F12
F13 Data write to
P13 IC card/ROM
P13
F14 Program
P14 read from IC
memory card
F15 16-bit data
P15 exchange
F16 32-bit data
P16 exchange
F17 Higher/lower
P17 byte in 16-bit
data
exchange
F18 16-bit data
P18 block
exchange
Control instruction
F19 Auxiliary
jump
Binary arithmetic instructions
F20 16-bit data
P20 addition
F21 32-bit data
P21 addition
F22 16-bit data
P22 addition
Boolean Operand
COPY S, D1, D2
PCOPY
ICRD S1, S2, D
PICRD
ICRD
ICWT S1, S2, D
PICWT
PICWT
PGRD S
PPGRD
XCH D1, D2
PXCH
DXCH D1, D2
PDXCH
SWAP D
PSWAP
BXCH D1, D2, D3
PBXCH
SJP S
+ S, D
P+
D+ S, D
PD+
+ S1, S2, D
P+
Description
The data of "S" is transferred to the all area
between "D1" and "D2".
The data stored in the expansion memory of the IC
card or ROM specified by "S1" and "S2" are
transferred to the area startign at "D".
The data specified by "S1" and "S2" are transferred
to the IC card expansion memory area or ROM
starting at "D".
The program specified using "S" is transferred into
the CPU from IC memory card and executes it.
(D1)→(D2), (D2)→(D1)
(D1+1, D1)→(D2+1, D2)
(D2+1, D2)→(D1+1, D1)
The higher byte and lower byte of "D" are
exchanged.
Exchange the data between "D1" and "D2" with the
data specified by "D3".
The program jumps to the label instruction specified
by "S" and continues from there.
(D)+(S)→(D)
(D+1, D)+(S+1, S)→(D+1, D)
(S1)+(S2)→(D)
Steps
7
11
11
3
5
5
3
7
3
5
7
7
12-71