Panasonic FP E Series User Manual page 329

Name Boolean
Leading AN↑
edge AND
Trailing edge AN↓
AND
Leading OR↑
edge OR
Trailing edge OR↓
OR
Leading OT↑
edge out
Trailing edge OT↓
out
Alternative ALT
out
AND stack ANS
OR stack ORS
Push stack PSHS
Read stack RDS
Pop stack POPS
Leading DF
edge
differential
Trailing edge DF/
differential
Symbol
Connects a Form A (normally open) contact serially only
for one scan when the leading edge of the trigger is
detected.
Connects a Form A (normally open) contact serially only
for one scan when the trailing edge of the trigger is
detected.
Connects a Form A (normally open) contact in parallel only
for one scan when the leading edge of the trigger is
detected.
Connects a Form A (normally open) contact in parallel only
for one scan when the trailing edge of the trigger is
detected.
Outputs the operated result to the specified output only for
one scan when leading edge of the trigger is detected. (for
pulse relay)
Outputs the operated result to the specified output only for
one scan when trailing edge of the trigger is detected. (for
pulse relay)
Inverts the output condition (on/off) each time the leading
edge of the trigger is detected.
Connects the multiple instruction blocks serially.
Connects the multiple instruction blocks in parallel.
Stores the operated result up to this instruction.
Reads the operated result stored by the PSHS instruction.
Reads and clears the operated result stored by the PSHS
instruction
Turns on the contact for only one scan when the leading
edge of the trigger is detected.
Turns on the contact for only one scan when the trailing
edge of the trigger is detected.
Description
Steps
(*1)
2
2
2
2
2
2
3
1
1
1
1
1
1
1
12-37