Panasonic FP E Series User Manual page 19

Data can be share among the various PLCs using the PC(PLC) link function
When using the 1-channel RS485 type communication cassette
When using the 1-channel RS485 and 1-channel RS232C combination type
PC(PLC) link function (up to 16 units) or 1:N communication (up to 99 units) with RS232C devices
When using the 1-channel RS485 and 1-channel RS232C in combination
Analog control supported
An analog potentionmeter (volume dial) is provided as a standard feature. This can be used in
applications such as analog timers, without using the programming tools. An analog unit is also available
as the intelligent unit.
Type with thermister input function
For the units of which part numbers or product numbers end in "TM", the leader line which enables the
thermister input is equipped instead of an analog potetionmeter. The change of the resistance value of
the thermister can be taken in as an analog value.
(The thermister of which resistance value is from 200 to 75 kΩ can be used.)
Calender timer function can be added
Optional backup battery enables the calender timer function.
1-3