Conducting A Hotsync ® Operation Via A Network - Sony PEG-N770C/E Operating Instructions Manual

Using your CLIÉ handheld
Conducting a HotSync
When you use the Network HotSync
available in many office environments. The Network HotSync
®
HotSync
your LAN or WAN (provided that the computer connected to the cradle also has the Network HotSync
application installed, your computer is on, and the HotSync
Connecting to your company's dial-in server
The Network HotSync
Your computer has TCP/IP support installed.


Both your company's network system and its remote access server support TCP/IP.


You have a remote access account.


Everything you need to connect to your company's dial-in server (network modem) is included in the


Palm™ Desktop for CLIÉ software and your CLIÉ handheld. You need to activate certain features,
however, on both the Palm™ Desktop for CLIÉ software and your CLIÉ handheld.
Preparing your computer
To prepare your computer, proceed as follows:
1 Click the HotSync
menu.
2 Click the HotSync
menu.
The Setup dialog box is displayed.
3 Click the Network tab and make sure your user name has a check mark selected next to it. If the check
mark is not there, select the check box next to your user name.
4 Click OK.
®
operation via a network
operation by dialing in to a network or by using a cradle that is connected to any computer on
®
application requires the following:
®
icon in the Windows
®
icon in the Windows
®
application, you can take advantage of the LAN and WAN connectivity
®
®
system tray and then select Network from the Shortcut
®
system tray again and then select Setup from the Shortcut
®
application enables you to perform a
Manager is running).
n N
82
®