Via A Network; Performing The Hotsync ® Operation Via A Network - Sony PEG-SJ33 CLIE Handbook (primary manual) Handbook

Performing the HotSync
network
To perform the HotSync
administrator skills.
You can perform the HotSync
handheld and the computer connected to the LAN at your office when you are
out of your office. You may not be able to perform the HotSync
a network depending on the network environment of your office.
For details, contact the administrator of the remote access server.
Prior to performing the HotSync
Verify the following.
• Both your company's network system and its remote access server support
TCP/IP.
• You have a remote access account.
Preparing your computer
1
Click the HotSync
select Network from the HotSync Manager shortcut menu.
2
Click the HotSync
and select Setup from the HotSync Manager shortcut
menu.
The Setup window is displayed.
3
Click the Network tab.
4
Click the check box next to the user name for HotSync.
Click TCP/IP Settings and assign a subnet mask as needed.
For details on a subnet mask address, refer to the manual of your operating
system or contact the system administrator.
5
Click OK.
Exchanging and updating data using the HotSync
®
HotSync operations)
®
operation via a
®
operations via a network, you must have network
®
operation via a network between your CLIÉ
®
operation via a network
icon in the Windows task tray and
icon in the Windows task tray again
®
operation (Other
®
operation via
Continued on next page
99