Performing A Hotsync Operation Via A Network; Performing A Hotsync ® Operation Via A Network - Sony CLIE PEG-NX60 Handbook

Performing a HotSync
network
To operate HotSync
competent as a network administrator.
You can perform a HotSync
handheld and the computer in the LAN of your office depending on the
network environment of your office. For details, contact the administrator of
the remote access server.
Prior to performing a HotSync
Check the following items.
• Both your company's network system and its remote access server support
TCP/IP.
• You have a remote access account.
• Your CLIÉ handheld is properly connected to a Mobile Communication
adapter sold separately.
Preparing your computer
1
Click the HotSync
(bottom-right corner of the taskbar) and select Network from
the shortcut menu.
2
Click the HotSync
and select Setup from the shortcut menu.
The Setup screen is displayed.
3
Click the Network tab.
4
Click the check box next to the user name for HotSync.
Click TCP/IP Settings and assign a subnet mask as needed. For details
on a subnet mask address, refer to the manual of your operating system or
contact the system administrator.
5
Click OK.
Exchanging and updating data using a HotSync
®
HotSync operations)
®
operation via a
®
operations via a network, a person must be as
®
operation via a network between your CLIÉ
®
icon in the Windows task tray
icon in the Windows task tray again
®
operation (Other
operation via a network
Continued on next page
• • • • • • • • • • • • • • • • • • •
110