Table of Contents
Advertisement
Using your CLIÉ handheld
Adding an image
You can paste an image to the address information. Paste a photograph of a person or restaurant, for
example, to remind you of an address record.
To paste an image, you need to install the PictureGear Pocket software onto your CLIÉ handheld. For
installation, see Installing PictureGear Pocket in the Software Guide manual.
After installation, proceed as follows:
1
In the address list, tap the address record for which you want to paste an image.
The Address View screen of the selected address record appears.
2
Tap Edit.
The Address Edit screen appears.
3
Tap No Image in the upper right of the screen.
The PG Pocket screen appears.
4
Tap No Image.
5
Select the image you want to paste.
The image you selected is pasted to the address information.
6
Tap Done.
The Address screen is displayed again.
A camera icon is attached to the record that has the pasted image.
7
To change the image, tap the Menu icon and select Another Image. Perform steps 5 and 6 above.
8
To remove the image, tap the Menu icon and select No Image.
If you use the Palm™ Desktop for CLIÉ software to change the category of the address record that has a pasted image, the image will no longer be
associated with the address record after the next HotSync
®
operation.
n N
44
Advertisement
Table of Contents
