Performing a HotSync
network
To operate HotSync
administrator skills.
You can perform a HotSync
handheld and the computer in the LAN of your office depending on the
network environment of your office. For details, contact the administrator of
the remote access server.
Prior to performing a HotSync
Check the following items.
• Both your company's network system and its remote access server support
TCP/IP.
• You have a remote access account.
Preparing your computer
1
Click the HotSync
right-hand corner of the taskbar) and select Network from
the shortcut menu.
2
Click the HotSync
and select Setup from the shortcut menu.
The Setup screen is displayed.
3
Click the Network tab.
4
Click the check box next to the user name for HotSync.
Click TCP/IP Settings and assign a subnet mask as needed. For details
on a subnet mask address, refer to the manual of your operating system or
contact the system administrator.
5
Click OK.
Exchanging and updating data using a HotSync
®
(Other HotSync
operations)
®
operation via a
®
operations via a network, you must have network
®
operation via a network between your CLIÉ
®
icon in the Windows task tray (bottom
icon in the Windows task tray again
®
operation
operation via a network
Continued on next page
116