Sony PEG-N770C/E Operating Instructions Manual page 80

Using your CLIÉ handheld
Transferring a created profile
To transfer a created profile, proceed as follows:
1 Place a CLIÉ handheld without a user name in the cradle.
2 Press the HotSync
The Users dialog box appears.
3 Click Profiles.
The Profiles dialog box appears.
4 Select the profile you want to transfer to your CLIÉ handheld, and then click OK.
5 Click Yes.
The selected profile is transferred to your CLIÉ handheld. The next time you perform a HotSync
operation, the Palm™ Desktop for CLIÉ software shows a dialog box where you can specify a user name
for your CLIÉ handheld.
Conducting an infrared HotSync
You can use the IR (infrared) port of your CLIÉ handheld to perform an IR HotSync
computer equipped with an IrDA (Infrared Data Association) IR port. An IR HotSync
to perform a HotSync
Before you start performing an IR HotSync
Check the following:
Your computer's operating system is not Windows


with a computer running the Windows
Your computer is equipped with an infrared port supporting the IrDA standards.


The infrared port of your computer is enabled for Windows


see the manual of the computer you are using or the Windows
®
button on the cradle.
®
operation
®
operation without using the cradle.
®
operation
®
2000 operating system.)
®
2000 (you cannot perform an IR HotSync
®
use. To enable the IR port with Windows
®
online help.
n N
79
®
®
operation with a
®
operation allows you
®
operation
®
,