Performing The Hotsync Operation Via A Network; Performing The Hotsync ® Operation Via A Network - Sony CLIE PEG-TJ27 Handbook

Performing the HotSync
network
To operate HotSync
administrator skills.
You can perform the HotSync
handheld and the computer in the LAN of your office, depending on the
network environment of your office. For details, contact the administrator of
the remote access server.
Prior to performing the HotSync
Check the following items:
• Both your company's network system and its remote access server support
TCP/IP.
• You have a remote access account.
Preparing your computer
1
Click
bottom right of the computer window and select [Network]
from the shortcut menu.
2
Click
bottom right of the computer window once again and select
[Setup...] from the shortcut menu.
The Setup window is displayed.
3
Click [Network].
4
Click the check box next to the user name for the HotSync
operation.
Click [TCP/IP Settings...] and assign a subnet mask as needed. For details
on a subnet mask address, refer to the manual of your operating system or
contact the system administrator.
5
Click [OK].
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
®
operations via a network, you must have network
®
operation via a network between your CLIÉ
in the Windows task tray (Notification area) at the
in the Windows task tray (Notification area) at the
®
operations)
operation via a
®
operation via a network
®
®
127