I Cannot Perform An Ir Hotsync ® Operation - Sony PEG-N770C/E Operating Instructions Manual

Getting help
Make sure HotSync


Make sure you selected Local from the HotSync


software menu.
Check the cable connection between the cradle and the USB connector on your computer.


Try a lower baud rate setting on the Local tab in the Setup dialog.


Read the HotSync


Make sure your CLIÉ handheld is seated in the cradle correctly.


Make sure the gold-plated connectors on the cradle and your CLIÉ handheld are clean. Use a pencil eraser


to clean them.
I cannot perform an IR HotSync
Make sure the HotSync


simulated port for infrared communication.
On your CLIÉ handheld, make sure the HotSync


IR to a PC/Handheld.
Make sure the IR port of your CLIÉ handheld is aligned directly opposite to, and within a few inches of,


the infrared device of your computer.
IR HotSync


your CLIÉ handheld. Recharge the internal battery.
When I tap the HotSync
for CLIÉ software and my CLIÉ handheld times out
Check the Palm™ Desktop for CLIÉ software HotSync Setup options to confirm that you have made the


correct settings for local HotSync
If you are experiencing intermittent success, try a lower speed setting on the Local tab in the Setup


dialog box in the HotSync
®
Manager is running. If it is, exit, and then restart it.
®
Log for the user account for which you are performing a HotSync
®
®
Manager is running and the Serial Port for local operations is set to the
®
operations do not work if you receive a low battery warning. Check the battery power of
®
button on the cradle, nothing happens in the Palm™ Desktop
®
®
Manager.
®
Manager menu or the Palm™ Desktop for CLIÉ
operation
®
application is set to Local, with the option
operations.
n N
124
®
operation.