Table of Contents
Advertisement
Resetting your CLIÉ handheld
Resetting your CLIÉ handheld
Under normal circumstances, you will not have to reset your CLIÉ handheld.
On rare occasions, however, your CLIÉ handheld may no longer respond to buttons or the screen due to
insufficient memory or other reasons. In this case, you need to perform a reset to get your CLIÉ handheld
running again.
Performing a soft reset
A soft reset tells your CLIÉ handheld to stop what it is doing and start over again. All records and entries
stored on your CLIÉ handheld are retained with a soft reset.
To perform a soft reset, proceed as follows:
1
Take out the reset tip by unscrewing the metal barrel from the stylus quill, as shown below.
2
Use the reset tip to gently press the reset button inside the hole on the back panel of your CLIÉ handheld.
3
The system shuts down and then restarts.
After restarting, the system displays Palm Powered, CLIÉ, and Sony, followed by the Preferences
screen for setting the time and date.
n N
11
Advertisement
Table of Contents
