Using your CLIÉ handheld
Calculator
The Calculator lets you perform general mathematical functions, such as addition, subtraction,
multiplication, and division.
To start the Calculator, proceed as follows:
1
Either:
Tap the Calculator button, or
Rotate the Jog Dial™ to select Calc and then press the Jog Dial™, or
Tap the Calc icon on the Application Launcher screen.
The Calculator screen appears.
2
Perform calculations by tapping the numbers and symbol icons on the screen with the stylus.
Calculator buttons
Calculator's buttons follow the standard commands of regular calculators.
CE: Clears the last number you entered. Use this button if you make a mistake while entering a number
in the middle of a calculation. This button enables you to re-enter the number without starting the
calculation over.
C: Clears the entire calculation and enables you to start a new calculation.
+/–: Toggles the current number between a negative and positive value. If you want to enter a negative
number, enter the number first and then press the +/– button.
M+: Places the current number in the Calculator memory. Each new number you enter with the M+
button is added to the total stored in memory. The number that you add can be either a calculated value
or any number you enter by pressing the number buttons. Pressing this button has no effect on the
current calculation (or series of calculations); it merely places the value into memory until it is recalled.
MR: Recalls the stored value from memory and inserts it into the current calculation.
MC: Clears any value stored in the Calculator memory.
: Calculates the square root of the entered number. Tap the button after entering the number.
n N
63