Conducting A Hotsync Operation Via A Network - Sony clie PEG-SL10 Operating Instructions Manual

Advanced Hot Sync
Conducting a HotSync operation via a netw ork
When you use the Network HotSync
of the LAN and WAN connectivity available in many office environments.
The Network HotSync application enables you to perform a HotSync
operation by dialing in to a network (Network Modem Sync) or by using a
USB cable that is connected to any computer on your LAN or WAN (LAN
Sync) (provided that the computer connected to the USB cable also has the
Network HotSync application installed, your computer is on, and the
HotSync Manager is running).
To connect to your company's dial-in server
The Network HotSync application requires the following:
• Your computer has TCP/IP support installed.
• Both your company's network system and its remote access server support
TCP/IP.
• You have a remote access account.
Everything you need to connect to your company's dial-in server (network
modem) is included in the Palm Desktop for CLIÉ software and your CLIÉ
handheld. You need to activate certain features, however, on both the Palm
Desktop for CLIÉ software and your CLIÉ handheld.
Preparing your computer
1
2
3
4
Chapt er 3
Downloaded from:
®
operat ions
Click t he Hot Sync
select Net w ork f rom t he short cut menu.
Click t he Hot Sync
and select Set up f rom t he short cut menu.
The Setup screen is displayed.
Click t he Net w ork t ab and make sure your user name has a
check mark next t o it . If t he check mark is not t here, click t he
check box next t o your user name.
Click OK.
Exchanging and updating data using a HotSync
https://www.usersmanualguide.com/
®
application, you can take advantage
icon in t he Window s t ask t ray and
icon in t he Window s t ask t ray again
® operation
Continued on next page
120