PerkinElmer TGA 8000 Installation And Hardware Manual page 33

The following is a description of the controls on the TGA 8000 Configuration
dialog:
Name: If you are adding a TGA 8000, the system will display a default name
in this field. Type the name you wish to assign to the analyzer, using a
maximum of eight characters. The name identifies the analyzer in Pyris
Software; it also appears in the Instrument button on the Pyris Manager panel
and in the title bar of the Instrument Application.
Port: Displays the COM port to which the analyzer is attached and that you
selected in the Add Analyzer dialog box. Best on Ports 1,2,3,4
Serial Number: Displays the serial number of the analyzer.
Accessories: Lists the available accessories for the analyzer. For the TGA
8000, the following accessories are available:
•
Cooling Jacket Accessory
•
Accupik
•
GMD 8000.
Firmware Version: Click the Firmware Version button to display the version
of firmware in the analyzer.
3. Click the Add Analyzer button. The Add Analyzer dialog box appears.
When a TGA 8000 is connected to the PC and has been added to the Pyris software
using the Add Analyzer dialog, it should be identified in the Pyris Configuration
dialog. If more than one TGA 8000 has been added, then the second one needs a
unique name when being connected.
4. From the list of available ports, select the port to which you connected the analyzer.
The TGA's Configuration dialog box is displayed.
5. The system detects the type of analyzer that is attached and displays the default
name and other information for a TGA in this dialog box. Select the accessory, if any,
that is connected to the TGA 8000 (for example, GMD 8000, Accupik).
Set Up TGA 8000 System Components . 33