Unpack The Tga 8000 - PerkinElmer TGA 8000 Installation And Hardware Manual

Unpack the TGA 8000

Each component of the TGA 8000 system comes in its own box. The system components are:
•
TGA 8000
•
Personal Computer
•
Printer (optional)
•
Installation Kit containing the Spares Kit
CAUTION: Take care when unpacking the TGA. Some of the boxes packed with
it contain fragile parts that can break easily.
ATTENTION: Faites attention lors du déballage du TGA. Certaines des boîtes
emballées avec elle contiennent des pièces fragiles qui peuvent se casser
facilement.
The autosampler is used to automate the running of samples. If you ordered a TGA with an
autosampler, it is shipped with the autosampler already installed.
When you unpack the box, check all the parts included against the shipping list. If any part is
damaged or missing, contact the shipping company and PerkinElmer immediately.
The TGA is shipped in a large box that contains the analyzer and a box that contains the
Install Kit (P/N N5320120). In the Install Kit is the Spares Kit (P/ N N5320026).
To unpack the TGA main box:
1. Place the instrument carton on the floor in front of the bench on which the
instrument will be placed. Open the box.
2. Remove the box from the packing, then remove the autosampler tray and furnace
door and set them aside.
Unpack the TGA 8000 . 27