Rear Module Available for 9021
This section provides instructions for connecting cables to the installed BNC rear modules. Connect the
input and output cables according to the applicable diagram below. Split rear module RM20-9021-A/S
and RM20-9021-B/S allow two cards to be installed in adjacent slots. B/S versions are available in
DIN1.0/2/3 and HDBNC versions.
RM20-9021-A
Figure 3. Connector Designations for the 9021 Rear Modules.
9021 Owner's Manual • • • • (V 1.1)
RM20-9021-A/S
RM20-9021-B/S
Page 12 of 22