Directions For Use; Foot Control Operations - OAKWORKS DTPM 300 User Manual

DIRECTIONS FOR USE

The Oakworks Fluoroscopy Table with Trendelenburg positioning offers a variety of positioning
®
capabilities for diagnostic x-ray imaging and imaging during therapeutic procedures.
DANGER
Should the use of this device create a circumstance under which the patient could be overexposed to
ionizing radiation, discontinue use immediately and determine an alternative radiology table or alter-
native x-ray generating source to use.
F O O T C O N T R O L O P E R A T I O N S
CAUTION
All Oakworks Fluoroscopy Tables come complete with one foot control to control height and a hand
®
control to operate the height and trendelenburg functions of the table.
Operate the Foot control as shown below to raise or lower the height of the table. To increase or
decrease the angle of tilt up to a maximum of 14º on either side, see the Hand Control Operations on
the next page.
UP
The Foot control must remain on the floor. Damage to the table will
result if the foot control or other objects are placed under the column.
When operating the table's controls, be sure to observe all cautions
and warnings.
DOWN
6