Spine Positioning System Ii; Locking Casters Use - OAKWORKS DTPM 300 User Manual

DIRECTIONS FOR USE
S P I N E P O S I T I O N I N G S Y S T E M I I (A C C E S S O R Y)
For directions on the use of the Spine Positioning System, see publication "Spine Positioning System"
Part number MMMMNUP0003
CRESCENT
FACE PAD
RADIOLUCENT
FRAME WITH
ADJUSTABLE
FACE REST
8" X 22" X 2"
7" X 12" X 1½"
(20cm x 56cm x
(18cm x 31cm x
5cm)
4cm) SMALL
LARGE
RECTANGULAR
RECTANGULAR
ADJUSTER PAD
ADJUSTER PAD
L O C K I N G C A S T E R S U S E
All four casters should be locked at all times during use with a patient.
LOCKING THE CASTERS
1. Place your shoe on the end of the casters locking tab.
2. Press firmly downward until you here a clicking noise
and the caster is locked.
CONTOURED
TORSO WEDGE
CARRY CASE
UN-LOCKING THE CASTERS
1. Place your shoe on top of the casters locking tab.
2. Press firmly inward and downward until you here a
clicking noise and the caster is unlocked.
CONTOURED TORSO
SUPPORT PAD
8" (20 CM.)
SEMI-
ROUND
BOLSTER
11