Hfr Data Transfer Connection; Relationship Between Operation Mode And Output Slots - Sony BPU4800 Operating Instructions Manual

Settings
Device Setting
BPU4800 Image format settings
Video output connector
settings
HDC4800 Prompter output
connector settings

HFR Data Transfer Connection

HFR data that was recorded on the unit can be transferred to
external storage using the PWA-RCT1 Record Control
Software.
Connection example
PL lens
HDC4800
Color Camera

Relationship between Operation Mode and Output Slots

The relationship between the picture size, frame rate, and
output format of each output slot in QFHD (3840×2160), HD
(1920×1080), and HD Cutout mode is shown in the following
tables.
Note
The format of the output signal from the NMI-LAN connector
is the same as for the SDI connector, but the NMI-LAN output
has some limitations (see table footnotes).
Menu/Page
CONFIGURATION/
<OUTPUT FORMAT>
CONFIGURATION/
<OUTPUT FORMAT>
Can also be set using the control panel.
MAINTENANCE/<SDI OUT>
GPIO (25P) NETWORK 1 NETWORK 2
MAINTENANCE
IN OUT 1/2 3/4 5/6
1 2
SHARE PLAY TIME CODE AUDIO (AES/EBU) IN
1 2 1 2
SLOT2 NMI SLOT1 REPLAY NMI SLOT1 LIVE NMI
SLOT1 REPLAY SLOT1 LIVE
SDI OUT 1 SDI OUT 2 SDI OUT 3 SDI OUT 4 SDI OUT 5 SDI OUT 6 SDI OUT 7 SDI OUT 8 SDI OUT 1
SDI1
RCP/ REFERENCE
CNU
IN OUT
1GbE
Item
SYSTEM RESOLUTION
FORMAT
FREQUENCY
SLOT1 to
SLOT3
SDI-MONI OUT
The transferred HFR data can be played back using the
RWV-10 RAW Viewer Software.
HD SDI monitor
MAINTENANCE
7/8 1/2 3/4 5/6 7/8
REMOTE 1/2
AUDIO (AES/EBU) OUT
1 2
SDI OUT 2 SDI OUT 3 SDI OUT 4 SDI OUT 5 SDI OUT 6 SDI OUT 7 SDI OUT 8
SLOT1 REPLAY SLOT2 REPLAY SLOT3 LIVE SLOT2 LIVE
SDI2 SDI OUT SDI OUT 1 SDI OUT 2 SDI OUT SDI OUT 1 SDI OUT 2
10GbE
12
Set value
3840×2160
Frame frequency
Video output format of each
slot
HD-PROMPT
Display
Windows PC on which
PWA-RCT and RAW-10
are installed
USB3.0
HDD or SSD