Menu List - Sony BPU4800 Operating Instructions Manual

Menu List

Legend
The following conventions are used in the menu tables.
Settings ON, OFF, 0, etc.: Factory default settings shown underlined.
ENTER to execute: Execute by pushing the control knob or setting the CANCEL/ENTER lever to the ENTER position.
CONFIGURATION menu
Page name Item
Page No.
<BARS> BPU BARS
C01
BARS TYPE
2SI DIAMOND
MARKER
<SYSTEM SETTINGS> CCU
(C02)
SYSTEM FORMAT
COLOR MODE
HDR MODE
Set value
OFF, ON
BAR 16:9 (100%), BAR 16:9
(75%), SMPTE 16:9 (BLACK),
SMPTE 16:9 (–I/Q), BAR 4:3
(100%), BAR 4:3 (75%), SMPTE
4:3 (BLACK), SMPTE 4:3 (–I/Q),
MF-ARIB (75%), MF-ARIB (100%),
MF-ARIB (+I), MF-SMPTE (–I,Q),
MF-SMPTE (75%,Q), MF-SMPTE
(100%,Q), MF-SMPTE (+I,Q),
HD-CUSTOM, SDI CHECK FIELD,
Y-RAMP, Y/C-RAMP,
HD-CUSTOM2
OFF, ON
1920×1080, 1280×720
RESOLUTION 3840×2160, 1920×1080
FREQUENCY 59.94, 50
BT.709, BT.2020 (WIDE-F),
BT.2020 (WIDE-BC)
OFF, LIVE HDR
SDR GAIN 0.0db to –15.0db
HDR CONTRAST 100% to 566%
HDR BLACK –99.9 to 99.9, 0.0
OFFSET
Meaning
BPU color bar output on/off setting (output on
SLOT1/2/3 LIVE only)
Color bar type
When connected to a CCU, it is set by the CCU and
cannot be modified from the BPU menu.
Sets diamond mark superposition on the color bar for
4K 2-sample interleave output.
See "4K 2SI diamond marks" (page 22).
Video resolution setting for transfer to CCU (display
only)
System format settings
(The selectable system format options vary
depending on the installed options.)
SLOT1 output color space setting
BT.709: Color space setting close to HDC series.
BT.2020 (WIDE-F): Color space setting close to
BT.2020. (If HD Cutout is set when WIDE-F is
selected, then the color space of the SLOT1 REPLAY
HD Cutout output is set to NORMAL.)
BT.2020 (WIDE-BC): Color space setting close to
BT.2020, which maintains compatibility with BT.709.
OFF: Normal SDR shooting mode.
LIVE HDR: Enhances the video dynamic range on the
camera, and outputs adjusted HDR video.
SDR output gain setting relative to HDR output
(Enabled in LIVE HDR mode only)
HDR output contrast ratio relative to SDR output
(display only) (Enabled in LIVE HDR mode only)
HDR output black offset relative to SDR output
(display only) (Enabled in LIVE HDR mode only)
19