Sony BPU4800 Operating Instructions Manual page 38

Baseband processor unit
Hide thumbs Also See for BPU4800:
Table of Contents

Advertisement

• File List Repeat
Feed Play Mode
Sets the playback speed of feed play.
If the playback speed is controlled using the PWA-PRC1
application, this setting is ignored.
• Off (1x)
• On (4x)
• On (8x)
• On (16x)
Forced Shuttle Mode
Selects whether to forcibly switch to shuttle control when
using the Jog/Var command.
• Off
• On
TC Setup
TCR Select
Sets the readout value of the time code reader.
• LTC
• VITC
DF Mode
Sets the drop frame mode of the timer counter.
• NDF
• DF
TC OUT
Selects the signal to output from the TIME CODE OUT
connector of the connector panel.
• TC
• Through
• TM1
• TM2
Timer Select
Selects the time data to display.
• TC
• UB
• TM1
• TM2
Timer Set
Displays the time counter.
To change the counter, enter a value and click the [Set]
button. Clicking the [Reset] button resets the counter.
Note
Displayed only when [Timer Select] is set to TM1.
Character
Character On/Off
Selects whether to display superimposed character
information, such as the time code, on the monitor signal.
• Off
• On
Character Size
Sets the display size of character information.
• Small
• Medium
Vertical Position
Sets the vertical display position of character information.
• 0 (top) to 22 to 255
Horizontal Position
Sets the horizontal display position of character information.
• 0 (left) to 128 to 255
Character Info.
Sets the character information content if [Character On/Off] is
set to "On."
• Timedata Only: Timer counter only
• Timedata & VITC: Timer counter and VITC
• Timedata & TM1: Timer counter and TM1
• Timedata & TM2: Timer counter and TM2
• Timedata & UB: Timer counter and user bits
• Timedata & Status: Timer counter and operating status
• Timedata & Audio: Timer counter and audio level
• PRC Character: Cannot be selected.
Background
Sets the character information background.
• Outline: White characters with black outlines
• Translucent: White characters on a gray transparent
background.
• without BG: White characters with no background
• with BG: White characters on a black background
Sub Status
Sets additional information displayed with the character
information.
• Off: Displays no additional information.
• File Name: Displays the file name.
Warning Display
Sets whether to display a flashing warning message on the
second line of character information when [Character Info.] is
set to an item other than "Timedata Only."
• Off
• On
Audio Meter
Audio Meter On/Off
Sets the audio meter display.
• Off
• On
Position
Sets the display position of the audio meter.
• Upper Left: Upper left
• Upper Right: Upper right
• Left: Left
• Right: Right
• Lower Left: Lower left
• Lower Right: Lower right
Translucency
Sets the translucency of the audio meter display.
• Off: Non-translucent display
• Half-translucent: Semi-translucent display
Channel Setting
Sets the channels to display in the audio meter.
• L - R
• CH01 - CH02
• CH03 - CH04
38

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents