Sony BPU4800 Operating Instructions Manual page 29

Baseband processor unit
Hide thumbs Also See for BPU4800:
Table of Contents

Advertisement

Setup tab
Makes basic operating mode settings of the unit.
System Parameters
Preroll Time
Sets the preroll time in units of seconds.
• 0 to 5 to 30 seconds
Rec Inhibit
Sets record inhibit mode.
• Off: Enables recording
• On: Disables recording
Frame PB Mode
Selects the playback mode during variable speed playback.
• Field: Field playback
• Frame: Frame playback
Freeze PB Mode
Specifies the freeze mode and freeze timing for manual
freeze (freeze control using REMOTE 1/2 (9-pin) connectors
and GPIO (25-pin) connector) and auto freeze.
• Field 1: Freezes the 1st (odd) field.
• Field 2: Freezes the 2nd (even) field.
• Frame: Freezes in frame mode.
Record File Naming
Selects the file naming convention for automatically
generated files.
• File + Sequential: Assigns a sequential number.
• Serial + Time: Uses the recorded time as the file name.
• User Specified Name: Allows the user to specify a
4-character prefix for the file name (set using [User
Specified Name] on the [HFR Data Record Port] tab of the
[Port] screen).
File Delete Mode
Selects whether to delete a file if the Delete command is
received for a file for which playback or file transfer (export) is
in progress.
• Inhibit: Prevents deletion of files during playback or file
transfer.
• Permit: For a file during playback, it deletes the file when
the port closes. For a file during file transfer, it stops the
transfer and then deletes the file.
QFHD SDI with TC
Selects whether to superimpose the time code on the output
from SLOT1 REPLAY SDI OUT 1/2 only or on all SDI signals,
if QFHD is specified as the video format.
• SDI-1 only
• All SDI
Time Shifted Play
Selects, when using chasing playback, whether to play back
video stored in a buffer for playback with the shortest delay,
or to play back video that is recorded in storage.
• Shortest Delay
• From Storage Only
No Video Output Signal
Selects the display color or the main output and monitor
output if there is no input signal on the input port or nothing is
playing on the output port.
• Gray
• Dark Gray
• White
• Black
Control Inhibit
When enabled, this prevents all changes to the configuration
using the web menu.
TC OUT
Displays the signal to output from the TIME CODE OUT
connector on the connector panel. However, it is fixed to
"Through" when using QFHD XAVC Transcode Port.
• TC
• Through
• TM1
• TM2
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents