Sony BPU4800 Operating Instructions Manual page 42

Loop tab
Assigns the recording area for each input/output when using
loop recording. The recording loops back to the start of the
loop recording area when it reaches the end of the area,
overwriting the file. If there is more than one file in the loop
recording area, files are overwritten starting with the oldest
file.
Create Loop Recording Area
Remain Area
Displays the remaining area capacity assigned for loop
recording.
Assign Port
Selects the input board to assign a loop recording area.
Assign Area
Specifies the capacity assigned for loop recording for the
corresponding port. Also, the loop recording time is
calculated for display from the specified capacity.
The capacity is specified in 1/16 units of the capacity of the
memory board installed in the unit.
• For one memory board:
1/16, 2/16 to 15/16, 1
• For two memory boards:
1/16, 2/16 to 15/16, 1, 1 + 1/16 to 1 + 15/16, 2
Area Information
Displays the Loop Recording Area numbers for use.
When finished making settings, click the [Submit] button. The
storage is formatted, and the specified capacity and the loop
recording areas are assigned. Click the [Cancel] button to
return to the current settings.
42