Sony BPU4800 Operating Instructions Manual page 45

Syntax: RETR <SP> <path_name> <CRLF>
Example: RETR FILE00000010.mxf
STOR
Copies MXF files on the computer to the current directory.
Syntax: STOR <SP> <path_name> <CRLF>
Example: STOR FILE00000010.mxf
RNFR
RNTO
Renames a file.
Specify the current file name using the RNFR command and
specify the new file name using the RNTO command (always
execute the RNFR command before executing the RNTO
command).
Note
Files cannot be renamed during recording or playback.
Syntax: RNFR <SP> <path_name (current file name)>
<CRLF>
RNTO <SP> <path_name (new file name)>
<CRLF>
Example: RNFR FILE00000010.mxf
RNTO SCENE100.mxf
DELE
Deletes the file at the specified path on the unit.
Notes
• Files cannot be deleted during recording or playback.
• Files may not be deleted, depending on the type of
directory or file.
Syntax: DELE <SP> <path_name> <CRLF>
Example: DELE FILE00000099.mxf
STAT
Transmits attribute information about the file at the specified
path or transmits data transfer status from the unit to the
computer. If a file is specified, the following attribute
information is displayed.
• MXF file
- File name (excluding .mxf extension)
- File protection information
- File type
- File length (number of frames)
- File size (number of bytes)
- File recording date
- File recording time
- File update date
- File update time
- DF flag (NDF/DF)
- First LTC value
- Flag (OK/NG/KEEP)
- System frequency (23/24/25/29)
- Video system frequency
(23/24/25/29/50/59/100/119/150/179/200/239/300/35
9/400/479)
- Video scan type (Interlaced/Progressive)
- Number of video pixels (e.g. 3480 × 2160)
- Video signal type (YPbPr/RGB/XYZ)
- Video bit depth (8/10/12 bits)
- Video codec information
- Video compression mode
- Audio codec and sample frequency information
- Number of audio channels
- Non-audio information (1-bit × 16 channels)
- Emphasis information (2-bit × 16 channels)
- Recording model information (15: BPU4800)
- Playback permission information and editing permission
information
• Subclip In-point information
• Subclip Out-point information
• Color space information
If a storage folder is specified, detailed storage information is
displayed.
- Model name
- Serial number
- Protection information
- Volume label
- Access start date
- Final formatting date
- Final update date
- Remaining capacity (GB)
- General file area remaining capacity (%)
Syntax: STAT <SP> <path_name> <CRLF>
The following data is transferred, depending on the presence
or otherwise of the file specified in <path_name>.
• When a file is specified: Attribute information about the
specified file
• When storage is specified: Detailed information about the
specified storage
• Nothing specified: RETR transfer progress rate (%) (over
4 sessions)
Typical output: 211 45 75 10 25
Example 1: STAT FILE0000001.mxf
Example 2: STAT InternalStorage1
ABOR
Aborts the currently executing data transfer and other tasks
on the unit.
Syntax: ABOR <CRLF>
SYST
Displays the system name of the unit.
Syntax: SYST <CRLF>
NOOP
No operation (command used to check operation of the unit).
Syntax: NOOP <CRLF>
PWD
Displays the current directory ("/" is displayed for the root
directory).
Syntax: PWD <CRLF>
CWD
Changes the current directory (switches from the current
directory to another directory).
45