Hfr Video System - Sony BPU4500A Operation Manual

Device Setting
CA4000 Prompter output
connector settings

HFR Video System

The BPU4500A can transfer HFR video and perform signal
processing for the following formats according to the
connected camera.
HFR format
1)
1080/59.94P (2×)
1)
1080/50P (2×)
2)
720/59.94P (2×)
2)
720/50P (2×)
1)
1080/59.94P (3×)
1)
1080/50P (3×)
2)
720/59.94P (3×)
2)
720/50P (3×)
1)
1080/59.94P (4×)
1)
1080/50P (4×)
2)
720/59.94P (4×)
2)
720/50P (4×)
1)
1080/59.94P (6×)
1)
1080/50P (6×)
2)
720/59.94P (6×)
2)
720/50P (6×)
1)
1080/59.94P (8×)
1)
1080/50P (8×)
2)
720/59.94P (8×)
2)
720/50P (8×)
4096×2160/59.94P (2×)
4096×2160/50P (2×)
1) Interlaced output also supported in HD HFR 1080 format
2) Selectable only when the format is set to 720P by the camera control unit (such as the HDCU2000).
A 1× frame rate signal can be output at the same time from
SLOT3, SLOT4, and the CCU.
Notes
• The HFR imaging function is dependent on the software
version of the connected camera and camera adaptor.
Check the compatibility of each device before use.
• When HD HFR is selected, the HFR video is output as an
SDI signal only. IP is not output.
Menu/Page
MAINTENANCE/<SDI-OUT>
MAINTENANCE/<PROMPTER2 OUT>
Connected device
Without option SZC-4002 series installed
HDC4300, HDC-P43 PMW-F55
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No No
No No
No No
No No
No No
No No
Item
SDI-MONI OUT
OUTPUT
Optional SZC-4002/4002M/4002W HFR Software must be
installed to support formats other than 2× and 3× HD.
F65
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
18
Set value
HD-PROMPT
PROMPTER2
Yes: Supported, No: Not supported
HDC4300, HDC-P43
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes