Sony BPU4800 Operating Instructions Manual page 50

Baseband processor unit
Hide thumbs Also See for BPU4800:
Table of Contents

Advertisement

1)
Code
Indication
1C01pp
PORT x NO A7/A8 INPUT (P-x NO A7/A8)
210101
SLOT MX REC INHIBIT
(REC INHBIT)
220201
SLOT MX FS LOCKED
(FS LOCKED)
220400
UNFORMATTED MEMORY BOARD DETECTION
300100
POWER SUPPLY A INVALID INPUT VOLTAGE
300200
POWER SUPPLY B INVALID INPUT VOLTAGE
310100
POWER SUPPLY A MISCELLANEOUS DEFECT
310200
POWER SUPPLY B MISCELLANEOUS DEFECT
470100
RTC BATTERY LOW LEVEL
(RTC BATT LOW)
740200
ASYNCHRONOUS SHARE PLAY INTERFACE
750191
SHARE PLAY1 INTERFACE DEFECTIVE
750192
SHARE PLAY2 INTERFACE DEFECTIVE
90XX00
SYS1-APP SHARED MEM ACCESS FAIL 1, etc.
AA0100
SYS1 FTP IF TASK ERROR
BB01pp
PORT x NMI COMMUNICATION ERROR
D204pp
PORT x DATA READ ERROR IN SHARE PLAY
D40201
SLOT MX AV READ ERROR2
D901pp
TRANSCODE PROC FAILED
E10101
MEMORY FULL, NOT RECORDABLE
(M1 FULL)
E10201
MEMORY COND3 BAD, NOT RECORDABLE
(M1 COND3 BAD)
E10301
MEMORY FUNCTION LIMIT
(M1 FUNC LIMIT)
E10501
MEMORY MAXIMUM FILES, NOT RECORDABLE
(M1 MAX FILES)
E10601
MEMORY FILE SYSTEM STUFFED, NOT
RECORDABLE
(M1 FS STUFFED)
E202pp
PORT x FULL, STOP RECORDING
(P-x FULL STOP)
E401pp
PORT x NMI LINK RESOURCE LACK
1) The portion in lower case letters in the above codes is one of the
following numbers.
pp: Number identifying the corresponding port.
81: HFR Data Record Port
82: Replay Port or HD Cut Out Port
B1: Transcode Port
2) Information in parentheses () indicates short messages for
superimposed display.
2)
Description
Carrier cannot be detected on digital audio channel 7/channel 8
input of the displayed port.
Cannot record to memory due to a menu setting.
The memory in the indicated slot is locked and cannot be
recorded.
An unformatted memory board was detected.
The input voltage applied to power supply unit A is incorrect.
Check the applied power supply voltage.
The input voltage applied to power supply unit B is incorrect.
Check the applied power supply voltage.
An error was detected in power supply unit A.
An error was detected in power supply unit B.
The lithium battery on the SY-422 board is low on power.
SHARE PLAY operation malfunctioned because the phase
difference with the reference sync signal exceeded the permitted
range.
External Warning notification if the Share Play Primary is a valid
port but the link is down.
External Warning notification if the Share Play Secondary is a valid
port but the link is down.
CAMERA APP and SYS1 communication is unstable.
An error was detected in the FTP function of CPU (SYS1) on the
SY-422 board.
There was not response to the NMI command.
An access error to target storage occurred during SHARE PLAY
execution.
A video playback error attributable to memory was detected.
An error occurred on the device during transcoding.
The recording operation/command was terminated because there
was insufficient remaining recording capacity in memory.
Deletes files from memory.
Cannot record because the swap space to replace bad memory
cells has been consumed in memory. The recording operation/
command was terminated.
The recording/playback operation was terminated due to memory
function limits related to recording and playback.
The recording operation/command was terminated because the
number of files in memory has reached the upper limit.
Deletes files from memory.
The recording operation/command was terminated because the
memory file system control limits have been reached.
Format the memory to use it for recording.
Recording was terminated for the indicated port because the
memory is full.
An error was detected relating to the control from PRCM.
50

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents