Badger Meter FC-5000 User Manual page 41

Scaled OutputsE: Output Settings
Use this menu to change the output settings for the respective output mode�
1� Navigate to SETUP > ADVANCED SETUP > SCALED OUTPUTS�
2� Press UP/DOWN to scroll to the applicable output settings, then press ENTEO�
3� Scroll to and edit each option, as necessary�
a� If using the frequency output configuration
Output Mode Option
OUTPUT SOURCE
SCALE MINIMUM
PULSE: RATE
SCALE MAXIMUM
MAXIMUM
FREQUENCY
OUTPUT FREQ
OUTPUT SOURCE
PULSE: TOTAL SCALING FACTOR
SCALED PULSE
COUNT
b� If using the analog output configuration
Option
OUTPUT SOURCE
ANALOG FULL SCALE
ANALOG LOW SCALE
April 2019
Description
Parameter assignment of the output
(such as rate, total or temperature)
Minimum parameter value associated with
output minimum
Maximum parameter value associated with
output maximum
Maximum frequency output value
(Read Only) Real-time output frequency
Parameter assignment of the output
(such as rate, total or temperature)
Units of measure transmitted, per pulse
(Read Only) Number of transmitted pulses
Table 27: Frequency output settings
Description
Parameter assignment of the output
(such as rate, total or temperature)
Maximum value associated with output maximum
Minimum value associated with output minimum
Table 28: Analog output settings
CTL-UM-01723-EN-03
Advanced Setup
Page 41