Badger Meter FC-5000 User Manual page 32

Basic Setup
For either of the Mass parameters (Rate or Total), the available units are:
For Temperature the available units are:
Unit
°F Degrees Fahrenheit
K
Creating Custom Units for Rate or Total Measurement
1� Follow the procedure outlined in
Unit of Measure menu for a parameter�
2� Press UP/DOWN to choose CUST, then press ENTEO�
N OTEE:
The display populates with additional icons that need to be modified for
custom units�
3� Press F2 (custom label)� Use the soft keys in conjunction with the numeric
keypad and UP/DOWN to create a custom label, then press ENTEO�
N OTEE:
See "Control Panel Keys" on page 21
for button functionality�
4� On the confirmation screen, press ENTEO to confirm the new custom unit� The
new label displays in the selection list�
5� Press F3 (conversion) to assign a conversion factor for this custom unit� The
number entered will be a factor related to the specific parameter�
◊ FLOW RATE: GAL/MIN
◊ FLOW TOTAL: GALLONS (GAL)
◊ TEMPERATURE: ° F (Fahrenheit)
6� Press ENTEO to save the change�
Page 32
Unit
lb
Kg
CUST
Table 19: Mass units
Description
Kelvin
Table 20: Temperature units
CTL-UM-01723-EN-03
Description
pounds
Kilograms
Custom
Unit
°C
R
"Unit of Measure" on page 31
and "Icon Functionality" on page 22
Description
Degrees Celsius
Rankine
to enter the
April 2019