Badger Meter FC-5000 User Manual page 33

7� On the confirmation screen, press ENTEO to confirm the change�
N OTEE:
For example, if making a custom unit for Flow Rate and 2 is programmed
as a conversion factor, the custom unit is equivalent to 2 GAL/MIN� If 0�5 is
entered, the custom unit is equivalent to 0�5 GAL/MIN�
Display Precision
The Display Precision setting determines the resolution of a value, indicated by the
number of digits after the decimal place, for the selected parameter unit�
1� Press UP/DOWN to scroll to DISPLAY PRECISION, then press ENTEO�
2� Scroll through the available options (0...4), then press ENTEO to select and
save the change�
Oadix
The Radix parameter determines if a period or comma is used to represent a
decimal place for the selected parameter unit�
1� Press UP/DOWN to scroll to RADIX, then press ENTEO�
2� Scroll through available options (decimal point or comma), then press ENTEO
to select and save the change�
April 2019 CTL-UM-01723-EN-03
Basic Setup
Page 33