Badger Meter FC-5000 User Manual page 38

Advanced Setup
Flow Sensor Properties
Use this menu to change flow meter properties, such as material, damping or
identification�
1� Navigate to SETUP > ADVANCED SETUP > SENSOR INPUTS�
2� Press UP/DOWN to scroll to FLOW SENSOR PROP, then press ENTEO�
3� Select and edit each option, as necessary�
The flow sensor properties are:
Option
Bore Diameter
Diameter Unit
Sensor Material
Sensor ID
Fixed Temp
Damping
Page 38
Description
Bore diameter of connected flow meter
Unit of measure (in� or mm) associated with bore diameter
Construction material of the connected flow meter�
• Aluminum
• Brass
• SS 302/3
• SS 304
• SS 316
• Cast iron
Descriptive, user-defined text string for the sensor
A fixed temperature value of the fluid medium going through the
flow meter� Used instead of a temperature sensor� Ignore this value if a
temperature sensor is used�
Smoothing coefficient� As the number increases, averaging becomes
greater� As the number decreases, it approaches the raw reading
Table 23: Flow sensor properties
CTL-UM-01723-EN-03 April 2019