Table of Contents
Advertisement
Assembly and installation
4
Assembly and installation
4.1 General
Installation work:
Hydraulic installation:
20
User qualification, mechanical installation: trained and qualified
n
Ä Chapter 2.1 'User qualification' on page 13
personnel
User qualification, electrical installation: electrical technician
n
Ä Chapter 2.1 'User qualification' on page 13
Intended use
The metering system is designed for installation
indoors. Operation outdoors is not permitted.
Do not operate the metering system under condi‐
tions other than those described in the technical
data.
Only allow adequately qualified and technically
expert personnel to operate the metering system.
All other uses or modifications are prohibited.
1.
Only fix the metering system on the feet intended for this pur‐
pose or as a wall panel on the wall.
2.
Ensure that the fixing surface is level (e.g. DIN 18202).
3.
Tighten all connectors (threaded connectors, flange connec‐
tors ...).
1.
When installing the metering system, always make sure that
the connectors on site are connected to the metering system
free of tension.
2.
Only use materials that comply with the provisions and speci‐
fications of the ProMinent resistance list.
Advertisement
Table of Contents
Troubleshooting
