Installation On The Floor - ProMinent DULCODOS universal mini Assembly And Operating Instructions Manual

Electrical installation:

4.2 Installation on the floor

Fig. 5: Installation on the floor. No special fixing is required.
WARNING!
Live parts
Cause: All work or installation work performed can
lead to danger from electrical current.
Possible consequence: Fatal or very serious inju‐
ries.
Measure: Carry out all work in line with the appli‐
cable national and international statutory regula‐
tions, laws and standards. The system operator is
responsible for compliance and implementation.
We fundamentally recommend the use of appro‐
priate residual current circuit breakers (RCCB) or
other residual current devices (RCD) providing
they can be installed sensibly and professionally
within the electrical installation. Please adhere to
all national standards and regulations.
1. The transition point for the electrical system is a terminal box
attached on the wall mounting plate with a master switch, to
which all signals and the power supply to the pumps and the
power supply to the controller are connected.
2. Connect the metering system in accordance with the terminal
diagram supplied to the on-site electrical installation.
Assembly and installation
A2703
21