Sony XDCAM PDW-1500 Operation Manual page 116

Item number Item name
701 SELECTION OF VIDEO/SYNC
DELAY
703 BLANK LINE SELECT
Sub-item
1
2 ... 9
10
2 ... 10 LINE 12 ...
11
2 ... 15 LINE 9, 322 ...
16
705 EDGE SUBCARRIER REDUCER
MODE
707 FORCED VERTICAL
INTERPOLATION OFF
116
8-3 Extended Menu
Menu items in the 700s, relating to video control
Settings
An E-E video signal is output delayed with respect to the video input
signal by the time for video circuit processing.
With this item, select whether or not to delay the sync signal attached to
the output video signal by an amount corresponding to the video signal
delay.
sync (sync delay): Delay the sync signal by the corresponding amount
video (video delay): Attach a sync signal with the same timing as the
Switch blanking of the video output signal on or off for individual lines in
the vertical blanking interval.
The Y/C signal and odd/even fields are blanked simultaneously.
ALL LINE - - -: Specify the blanking for each line separately.
blnk (blank): Regardless of the setting of other sub-items, blank all lines
thru (throu): Regardless of the setting of other sub-items, switch off
LINE 12 ... In 525(U) Specify blanking for lines 12 to 19.
LINE 19 line mode blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
LINE 20 Specify blanking for line 20.
blnk (blank): Carry out blanking.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
In 525(J) Specify blanking for lines 12 to 20.
LINE 20 line mode blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
LINE 21 Specify blanking for line 21.
blnk (blank): Carry out blanking.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
In 625 line Specify blanking for lines 9, 322 to 22, 335.
LINE 22, 335 mode blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
LINE 23 Specify blanking for line 23.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
Select whether to enable the edge subcarrier reducer (ESR).
on: Enable.
off: Do not enable.
When playing back a composite signal, set this to "on."
The "Y-add" function is normally switched on automatically during jog or
variable speed playback. This item selects whether or not to force the "Y-
add" function off.
auto: Automatically switch the "Y-add" function on.
off (forced YADD off): Force the "Y-add" function off.
The "Y-add" function is off while a disc image is displayed in stop mode
(menu item 108 "AUTO EE SELECT" is "off").
The "Y-add" function is a circuit operation to interpolate the video signal
vertically during jog or variable speed playback for the purpose of
reducing the vertical movement of the playback picture.
before attaching it.
input signal.
which can be specified in this menu item.
blanking for all lines which can be specified in this menu item.