Reordering Sub Clips - Sony XDCAM PDW-1500 Operation Manual

To search
Use the jog and shuttle dials.
2
At the point you want to set as the In point, hold down
the G/IN button and press the SET button.
An In point is set, and the IN indicator lights.
3
In the same way, search for the point you want to set
as the Out point, and then hold down the g/OUT
button and press the SET button.
An Out point is set, and the OUT indicator lights.
Clips recorded on the disc
Clip 1
In point
Sub clip 1
To check the duration
Press the G/IN button and the g/OUT button at the
same time.
The duration appears on the screen.
To reset an In point or Out point
With the G/IN button or g/OUT button held down,
press the RESET button.
4
With the SHIFT button held down, press the SET
button.
The section between the In point and Out point is
added to the end of the current clip list as a sub clip.
When you set In and Out points stretching across
several clips
One sub clip is created for each of the clips.
70
5-2 Creating Clip Lists
Clip 2 Clip 3
Out point
Sub clip 2 Sub clip 3
5
Repeat steps 1 to 4 until you have added all of the clips
you want to the current clip list.
6
Save the current clip list to disc.
See 5-2-6 "Saving the Current Clip List to Disc" (page
73).

5-2-2 Reordering Sub Clips

THUMBNAIL button
SG DATA SG DATA SG DATA SG DATA EDIT REMOTE [9P iLINK]
ACCESS
ANA SDI ANA SDI ANA SDI ANA SDI INPUT
VITC VIUB COUNTER VITC
AE8/EBU AE8/EBU AE8/EBU AE8/EBU
i.LINK
dB OVER dB OVER dB OVER dB OVER
SDI
0 0 0 0
CMPST
NETWORK -12 -12 -12 -12
Y-R,B
SG
LOCAL -20 -20 -20 -20
REMOTE HOURS MINUTES
-30 -30 -30 -30
-40 -40 -40 -40 MONITOR
MONITOR
-60 -60 -60 -60 1/2 3/4 AUDIO 625 IMX[50 40 30]
15 26 37 48 5/6 7/8 4 8 CH 18 24 BIT 525 DVCAM
CH- CH- CH- CH-
L
MIX
R AUDIO VIDEO COUNTER
MONITOR SEL METER SEL INPUT CH INPUT SEL INPUT SEL SELECT HOLD
ALL/CH-1 CH-2 CH-3 CH-4 SUB
VARIABLE CLIP
REC
PRESET
PB
CLIP
MENU
PHONES NEXT
PREV PLAY STOP REC
TOP F REV F FWD END
G/IN button
SUBCLIP button
NEXT button
PREV button
1
Press the SUBCLIP button, turning it on.
2
Press the THUMBNAIL button, turning it on.
Thumbnails of the sub clips in the current clip list
appear.
If the clip list you want to edit is not the current clip
list
SET button
SHIFT button
RESET button
EJECT
KEY INH
ALARM
REC INH
SECONDS FRAMES
SYS MENU SHIFT
MENU
THUMB
NAIL SET RESET
ESSENCE S.SEL
MARK MARK1
IN OUT
MARK2
Jog dial
g/OUT button
Arrow buttons