Repeat Playback - Sony XDCAM PDW-1500 Operation Manual

a)
Name of current clip list
Currently
selected sub clip
Recording date and
time of selected sub clip
a) When a title has been assigned to a clip list, the title is enclosed in
double quotation marks, for example "SAKURA."
To switch between duration and time code display
in the thumbnail display
Press the COUNTER SELECT button. Each press of
the button toggles between duration display and time
code display.
To escape from the thumbnail display to the full-
screen display
Press the THUMBNAIL button, turning it off.
2
Use the arrow buttons or the jog dial to select the sub
clip you want to cue up.
You can select sub clips with the following operations.
Press the PREV or NEXT button: Move to the
previous or next sub clip.
Press the PREV or NEXT button with the SHIFT
button held down: Move to the first or last sub
clip.
Press the F or f button with the SHIFT button held
down: Switch to the previous or next page.
3
To cue up the selected sub clip, press the SET button.
To start playback from the selected sub clip, press the
PLAY button.

4-2-5 Repeat Playback

You can perform repeat playback
playback.
Sixth frame is selected
from a total of 34 sub clips
Total duration of
sub clips in clip list
Duration of selected sub clip
or time code of first frame
1)
for normal and clip list
To perform repeat playback, set extended menu item 142
"REPEAT MODE" to "play," and then proceed as follows.
1) This is supported from firmware version 1.4.
1
Insert a disc.
To perform repeat playback for normal playback,
proceed to step 3.
2
To perform repeat playback for clip list playback,
press the SUBCLIP button.
3
Press the PLAY button.
Playback starts from the saved playback position.
Normal playback: When playback of the last clip
finishes, it resumes from the start of the disc,
repeatedly playing from the first through the last
clip on the disc.
Clip list playback: When playback of the last sub clip
finishes, it resumes from the start of the clip list,
repeatedly playing from the first through the last
sub clip in the clip list.
If extended menu item 142 "REPEAT MODE" is set
to "play," repeat playback starts from the first clip
automatically whenever you power the unit on with a
disc loaded. Clip list playback starts from the first sub
clip in the clip list.
To start repeat playback from the device
connected to the REMOTE connector
Set extended menu item 142 "REPEAT MODE" to "play,"
and then send a repeat playback command from the
external device.
For details of commands, refer to REMOTE (9-pin)
Protocol Manual for the PDW series.
To stop repeat playback
Do one of the following.
• Operate any of the playback buttons except the PLAY
button, or operate the jog or shuttle dial.
• From the external device connected to the REMOTE
connector on this unit, send a command other than the
repeat playback start command to this unit.
The unit executes the operation for the button press, jog or
shuttle dial operation, or remote command that stops
playback. (The unit enters search mode when you conduct
a search, and stop mode at the end of the disc.)
To disable repeat playback
Set extended menu item 142 "REPEAT MODE" to "off."
61
4-2 Playback